724-746-5500 | blackbox.com
Page 14
Gigabit 1000BASE-SX/LX PCI 64-/32-Bit Fiber NICs
System with existing NetWare client programs:
If there are Client32 programs installed in your system already, you can use the following procedures to set up your driver.
1. Add a Load driver command line to your STARTNET.BAT file in your Client32 directory. For example:
LOAD C:\NOVELL\CLIENT32\GETNWSC.LAN FRAME=Ethernet_802.2
The following is a sample of the STARTNET.BAT file:
SET NWLANGUAGE=ENGLISH
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\GETNWSC.LAN FRAME=Ethernet_802.2
LOAD C:\NOVELL\CLIENT32\GETNWSC.LAN FRAME=Ethernet_802.3
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
2. Execute STARTNET.BAT to connect to Server.
NOTE: If you want to use VID & TAG (HCHECKSUM for CHSM) keywords supported by management adapter, be aware of the
string length limitation in DOS prompt. The driver can’t be loaded if you are using Client32 for DOS Installer v2.01. Use
Installer v2.71 and later for CHSM Spec v1.11 driver.
4.4.2 Novell ODI 16-Bit DOS Client Driver
Before starting the installation, make sure that the NIC is properly installed and configured.
Installation using NetWare ODI Client Install utility:
1. Enter the destination directory for the NetWare client:
(The default directory is C:\NWCLIENT)
2. Install will modify your AUTOEXEC.BAT and CONFIG.SYS files.
Allow changes? (Y/N)
3. Do you want to install support for MS Windows? (Y/N)
4. Select the driver for your network card:
• Scroll through the list to choose “OTHER DRIVERS.”
• Press <Enter>, and the “Insert The Driver Disk” dialog box will be prompted. Type the path to the directory that contains the
driver and information file.
(A:\NETWARE\DOSODI)
• Press <Enter> and select the target ODI driver.
• Select optional settings.
• Press “F10” to save.
5. Press <Enter> to install.
