724-746-5500 | blackbox.com
Page 12
Gigabit 1000BASE-SX/LX PCI 64-/32-Bit Fiber NICs
Figure 4-2. Found New Hardware Wizard Window.
4. When prompted, insert the media you want to search into your CD-ROM drive, type the path to the driver, and select “OK.”
For example, where "e" is the designation of the CD-ROM drive on your system, enter:
E:\LH1660C-LC_SC-\WinXP\32
5. In the Driver Files Search Results window, verify that the correct path to the driver software is shown, then click “Next.”
The driver location for each Windows operating system is listed below.
• Windows 2000: CD ROM Root:\LH1660C-LC_SC-\Win2000
• Windows XP (32-bit): CD ROM Root:\LH1660C-LC_SC-\WinXP\32
• Windows XP (64-bit): CD ROM Root:\LH1660C-LC_SC-\WinXP\64
• Windows 2003 (32-bit): CD ROM Root:\LH1660C-LC_SC-\Win2003\32
• Windows 2003 (64-bit): CD ROM Root:\LH1660C-LC_SC-\Win2003\64
• Windows VISTA (32-bit): CD ROM Root:\LH1660C-LC_SC-\VISTA\32
• Windows VISTA (64-bit): CD ROM Root:\LH1660C-LC_SC-\VISTA\64
6. When the driver installation is completed, restart Windows if needed.
NOTE: On some machines, it is possible that some NICs fail to initialize. This might be caused by insufficient memory. Decrease
the Tx or Rx buffer number to solve this problem.
The flow control setting “Hardware Default (Auto)” means the flow control ability depends on the autonegotiation result
with the link partner. In other settings (“Enable Tx,” “Enable Rx,” “Enable Tx/Rx”), the driver will set the Tx or Rx flow control
ability without autonegotiation.
