Black Box LE2690A, Руководство пользователя, Страница: 13 / 22

8
9-PORT PERSONAL MINIHUB
Wall (or Vertical-Surface) Mounting
The 9-Port Personal Hub comes with a piece of Velcro mounting tape. You
can use this to mount a Personal Hub in a vertical position. Stick one side of
the Velcro to the bottom of the hub between the rubber feet. Stick the other
side of the Velcro to the desired vertical mounting location. This permits
the compact Personal Hub to be mounted on a wall surface, on the side of a
server cabinet, on the back of a desk, or in similar convenient locations in
the workplace where the associated cables are out of the way.
As an alternative to Velcro for vertical-surface mounting, you can use the
included small brackets to mount the MiniHub with screws, as shown below.
You can use the metal screws in each side of the Personal MiniHub’s case to
attach the brackets. With the brackets, you can mount the MiniHub in
almost any desired orientation or position.
3.2.2 P
OWERING
U
P THE
H
UB
Once you’ve mounted the 9-Port Personal MiniHub, plug the included
external power supply’s DC power cord into the matching power jack on
the Personal MiniHub’s rear panel. Plug the power supply’s transformer
into an AC receptacle that is six feet (2 meters) or less away. The green
“PWR” LED should light up. Now you are ready to begin attaching
Ethernet cable segments.
UP
LINK
PORT
LINK
RX
1 2 3 4 5 6 7 8
PORT 9 LINK
PWR
Bracket
Bracket