Black Box LE2690A, Руководство пользователя, Страница: 12 / 22

7
CHAPTER 3: Installation
3.1 Before You Install: Inspecting the Complete Package
Examine the shipping container for obvious damage prior to installing this
product; notify the carrier of any damage which you believe occurred
during shipment ar delivery. Inspect the contents of this package for any
signs of damage and make sure that you received these items:
• (1) 9-Port Personal MiniHub
• (1) External 120-VAC 60-Hz power supply
• (1) Velcro tape section, approximately 3 inches (7.6 cm) in length
• (2) Brackets for optional screw-mounting
• (1) Copy of this manual
Remove the 9-Port Personal MiniHub from the shipping container. Keep
the container in case you need to ship the unit later.
If any items are missing or damaged, contact your supplier. If you need
to return the unit, see
Sections 5.2 and 5.3
.
3.2 The Installation Procedure
Installing a 9-Port Personal MiniHub is very simple. First, keeping in mind
that it must be within 6 feet (1.8 m) of an AC outlet, decide how and where
you’re going to mount the MiniHub.
3.2.1 M
OUNTING THE
M
INI
H
UB
Tabletop- or Shelf-Mounting
9-Port Personal MiniHubs are easily mounted on a tabletop or shelf, and
have four rubber feet to provide stability without scratching finished
surfaces. A piece of Velcro may be used to add additional stability if desired.
When properly installed, the top-mounted LED status indicators will be in
plain view and easy to read.
The rugged steel case of the Personal Hub will protect it from accidental
damage in an office or lab workplace. Keep an open area around the unit
so that convection cooling can occur while the unit is operating.
3. Installation