724-746-5500 | blackbox.com
Page 21
Software Upgrade
A. SPECIFICATIONS
A.1 LINE RATE
192 to 5696 kbps (64k increments; 3-89 timeslots)
A.2 ETHERNET INTERFACE
Four RJ-45, 10/100Base-T, IEEE 802.3 Ethernet
A.3 STATUS LEDS
Power (Green)
The Power LED glows solid during normal operation. At startup, during the POST, the
LED blinks once every second. If the POST fails, the unit does not enter normal opera-
tion, and the LED blinks once every 0.4 seconds.
Line Link (Green) (C1 and C2 ports)
On both C1 and C2 ports, the Line LED glows solid while a link is established. While
the link is training, it blinks once every second.
ETH Link (Green)
The Ethernet Link LEDs show that there is an active physical network connection to
the Console or an Ethernet device.
A.4 CONFIGURATION
Configuration is done only with externally accessible DIP switches.
NOTE: Factory Default Configuration: 5.696 Mbps (DIP switches are all OFF)
A.5 POWER AND POWER SUPPLY SPECIFICATIONS
The LB532A-M comes with an external universal AC power supply.
• The power connection to the LB532A-M is a terminal block (see Figure 8 on
page 22)
• There is one fuse in the equipment rated at 250V, 500 mA, 2 sec.
• Rated voltage: 5 VDC
