background image

 724-746-5500   |   blackbox.com

Page 5

INSTRUCCIONES DE SEGURIDAD 

(Normas Oficiales Mexicanas Electrical Safety Statement)

   1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de 

que el aparato eléctrico sea operado.

   2. Las instrucciones de seguridad y operación deberán ser guardadas para refer-

encia futura.

   3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de oper-

ación deben ser respetadas.

   4. Todas las instrucciones de operación y uso deben ser seguidas.

   5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de 

la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc..

   6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que 

sean recomendados por el fabricante. 

   7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea 

recomendado por el fabricante.

   8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a 

lo descrito en las instrucciones de operación. Todo otro servicio deberá ser refer-
ido a personal de servicio calificado. 

   9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera 

su uso. La colocación del aparato eléctrico sobre una cama, sofá, alfombra o 
superficie similar puede bloquea la ventilación, no se debe colocar en libreros o 
gabinetes que impidan el flujo de aire por los orificios de ventilación.

   10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como 

radiadores, registros de calor, estufas u otros aparatos (incluyendo amplificado-
res) que producen calor.

   11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo 

descrito en el instructivo de operación, o como se indique en el aparato.

   12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización 

del equipo no sea eliminada.

   13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean 

pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo par-
ticular atención a los contactos y receptáculos donde salen del aparato.

Содержание LB532A-M

























Отзывы: