Page 21
724-746-5500 | blackbox.com
Chapter 7: Network Configuration
7. Network Configuration
From the menu, click Configuration. The Network > Configuration page appears
(see Figure 7-1).
Device Name:
ServSwitch Multiuser
Enable DHCP
MAC Address:
00:16:9D:02:DB:5B
IP Address:
192.168.2 .122
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.2 .1
Save & Restart
Network > Configuration
LAN
Network
Configuration
Administration
User Settings
Switch Configuration
Power Management
User Targets
Security
Settings
SSL Certificate
Maintenance
2x16 Switch Upgrade
SAMs Upgrade
Restore Factory Settings
Set Time & Date
Backup & Restore
Logout
Restart
Figure 7-1. Network > Configuration page.
Consult your network administrator for the network settings.
Device name - Type a name for the ServSwitch Multiuser.
LAN
The LAN section contains the following (see Figure 7-1):
Enable DHCP — When a DHCP server is active on the same network to which
the ServSwitch is connected, DHCP provides automatic IP assignment.
When DHCP is disabled (Recommended) – You can assign a fixed IP address to
the ServSwitch.
Consult your Network Administrator about using the DHCP.
When DHCP is disabled, enter the IP Address, Subnet Mask, and Default
Gateway for LAN, as given to you by your Network Administrator.
These parameters can be configured locally from the OSD as explained in
Section 5.2.
Содержание KVM2016A
Страница 2: ......
