Page 17
724-746-5500 | blackbox.com
Chapter 5: Configuring the System
5. Configuring the System
Configuring the system includes assigning server names, user and security set-
tings, and maintenance.
5.1 Connecting to the Local Area Network (LAN)
Configure the unit via a web interface. Connect a network cable to the LAN
port of the ServSwitch Multiuser.
5.2 Setting Network Parameters via the OSD
By default, the ServSwitch Multiuser boots with an automatically assigned IP
address from a Dynamic Host Configuration Protocol (DHCP) server on the net-
work. The DHCP server provides a valid IP address, gateway address, and subnet
mask.
You can identify the IP address from the OSD. Where there is no DHCP server,
set the IP address via the OSD as follows:
1. From the local keyboard, press left Shift twice. The OSD Main window appears.
See Figure 5-1.
Figure 5-1. Main menu.
Содержание KVM2016A
Страница 2: ......
