Black Box KV6104SA-R2, Руководство пользователя

Страница: 77 / 98

76
SERVSWITCH™ DUO AND SERVSWITCH™ QUADRO
5.18 Resetting to Factory Defaults (If ADMIN Password Lost, Etc.)
In some cases it might be necessary to completely erase any configuration settings
you might have set or changed in a ServSwitch Duo/Quadro and return it to its
factory-default configuration. The most common situation that would call for such
a radical action is if you lose the ADMIN password you set for the Duo/Quadro. If
the ADMIN password is lost, you won’t be able to administer the Duo/Quadro at
the system level, which includes adding or editing user profiles or computer
names.
To perform a complete reset to factory defaults, take these steps (you will need
to be able to access both the front and rear of the Duo/Quadro):
1. Make sure the Duo/Quadro is powered on normally.
2. While the Duo/Quadro is powered on, move position 2 (the right-hand one)
of the DIP switch labeled “R U” on the Duo’s/Quadro’s rear panel to ON
(down).
3. Press the USER and COMPUTER buttons on the Duo’s/Quadro’s front panel
at the same time.
4. The green USER 7-segment LED will show the lowercase letter “r” for a few
seconds to confirm that a reset is in progress.
5. Move position 2 back to OFF (up), its normal state.
The Duo/Quadro should now be back in its factory-default state, in which you can
login as ADMIN without requiring a password. See
Chapter 4 for instructions on
how to build a new configuration (or rebuild the old one) for the Duo/Quadro.