24
LINESHARE MASTER
[3] Time Before First Tone
This function sets the amount
of time (waiting period) that the
Lineshare Master waits before
transmitting the first tone. A time
of 1.5 seconds is factory preset, but
you can select a time from 0.5
seconds up to 9.9 seconds.
The first digit you enter is equal to
seconds, and the second digit equals
tenths of a second. For example, an
entry of 1 2 changes the waiting
period to 1.2 seconds. An entry of
0 5 changes the waiting period to
0.5 seconds. If an entry is less than
0.5 seconds, the Lineshare Master
defaults to 0.5 seconds.
Example
: To set a waiting period to
2.0 seconds, enter the programming
mode and press the following on
your tone phone:
3 Time Before First Tone
2 Waiting period in seconds
0 Waiting period in tenths of a
second
(3 beeps indicate correct entry)
(optional entries for additional
changes)
# Save changes and exit
programming
[4] Number of Tones
This function sets the Number of
Tones that the Lineshare Master
transmits. The Number of Tones
is factory preset to 10, but you can
select any number of tones from
1 to 99.
You must enter two digits per
entry. If the entry is less than 10,
enter a [0] in front of the single
digit. An entry of 0 9 sets the
Number of Tones to 9. An entry of
4 8 sets the Number of Tones to 48.
Example
: To set the Number of
Tones to 20, enter the programming
mode and press the following on
your tone phone:
4 Number of Tones
2 Number multiplied by 10
0 Number multiplied by 1
(3 beeps indicate correct entry)
(optional entries for additional
changes)
# Save changes and exit
programming
