21
LINESHARE MASTER
5. Using the Lineshare Master’s
Custom Functions
To change the features and
functions, we recommend using
the following steps:
• Using Tables 1 and 2, write
down the sequence of changes
• enter the programming mode
• change the functions
The following section explains
how to enter the programming
mode and change the functions.
5.1 Entering the Programming Mode
1. Make sure that the telephone
line from the phone company is
connected to the LINE-IN port
on the Lineshare Master.
2. Plug a tone-type phone into the
PRIMARY port of the Lineshare
Master.
3. Pick up the receiver of the
phone, and you should hear
the dial tone.
4. Within five seconds, press and
release the * key and then the #
key on the telephone keypad.
5. The Lineshare Master is now
ready to accept programming
changes.
The Lineshare Master includes many
options that enable you to customize
its operation to meet specific
application needs. The
programmable functions offered by
the Lineshare Master allow you to
change the length of its tones, time
between tones, time before the first
tone, number of tones to transmit,
as well as the call hold feature.
The Lineshare Master functions
are factory preset, and it is unlikely
that you will need to make many
changes. However, if you desire, you
can alter any program by using a
tone phone connected to the
PRIMARY port. The Lineshare
Master cannot be programmed
with a rotary/pulse dialing phone.
NOTE
Before attempting to
program any function, we
recommend that you first
thoroughly read the
programming procedures.
Then read Section 5.2,
“Changing functions” and
decide if you want to make
changes.
