23
LINESHARE MASTER
The following sections contain
specific information about each
function and how to change the
setting.
5.2 Changing Functions
In the previous section,
Table 5-1
lists the functions that can be altered
to customize the operation of the
Lineshare Master.
The functions are numbered [1]
through [9] [9] [9]. In this section
you will find a description of each
function and instructions for
customizing the function.
[
1] Tone Time
This function sets the length of each
tone that the Lineshare Master
transmits. A tone length of 0.5
seconds is factory-preset, but you can
select a tone length from 0.1 seconds
up to 9.9 seconds.
The first digit you enter is equal to
seconds, and the second digit equals
tenths of a second. For example, an
entry of 1 2 changes the tone length
to 1.2 seconds. An entry of 0 5
changes the tone length to 0.5
seconds.
Example
: To set a tone length to 1.5
seconds, enter the programming
mode and press the following on
your tone phone:
1 Tone Time
1 Tone length in seconds
5 Tone length in tenths
of a second
(3 beeps indicate correct entry)
(optional entries for additional
changes)
# Save changes and exit
programming
[2] Silence Time
This function sets the length of time
between each tone that the
Lineshare Master transmits. A
Silence Time of 1.5 seconds is
factory preset, but you can select a
Silence Time from 0.5 seconds up to
9.9 seconds.
The first digit you enter is equal to
seconds, and the second digit equals
tenths of a second. For example, an
entry of 1 2 changes the Silence
Time to 1.2 seconds. An entry of 0 5
changes the Silence Time to 0.5
seconds. If an entry is less than 0.5
seconds, the Lineshare Master
defaults to 0.5 seconds.
Example
: To set a Silence Time to 2.0
seconds, enter the programming
mode and press the following on
your tone phone:
2 Silence Time
2 Silence Time in seconds
0 Silence Time in tenths
of a second
(3 beeps indicate correct entry)
(optional entries for additional
changes)
# Save changes and exit
programming
