Black Box FOLS-MM-100, Руководство пользователя

Страница: 11 / 20

Page 9 724-746-5500 | blackbox.com
Chapter 3: Operation
3.2 AC Operation
If you will use the light source at one location, for example, in a laboratory or test
department, you can use the AC adapter to power it instead of batteries. Plug the
AC adapter’s output cable into the DC input jack on the light source’s bottom
side. When the AC adapter is plugged in, the AC indicator on the LCD will be dis-
played. See Figure 3-3.
Figure 3-3. AC adapter indicator.
NOTES: Power is supplied by the AC adapter when plugged in even if the battery
is installed. The battery indicator does not display on the screen.
Make sure that the operating voltage is within the range of the local AC
voltage. For example, input: AC 100-240 V, 50-60 Hz.