StarTac Dual Desktop Charger
Product Code
CP172A
Operating Instructions
Power Specification:
110 to 220 VAC
1. The device is equipped with a microprocessor that can
charge the phone with the battery in the front slot. The
phone can be in operation mode while the battery is
charging. One battery can be charged and discharged in
the back slot.
2. While charging a battery in the front slot, put the phone
into position. The charging indicator (PHONE) will turn red
to indicate that it’s ON. The front slot does not have a
discharging function.
3. While charging the battery in the back slot, put the battery
into position. The charging indicator (BAT) will turn red to
indicate that it’s ON. If the indicator does not start
blinking, the battery may be out of order. Remove the
battery and try again.
4. The indicator will be red after the battery is fully charged.
The indicator will turn green when the battery can be
removed. If the battery remains in the slot, the device can
automatically detect the status and can prevent the battery
from overcharging.
1000 PARK DRIVE • LAWRENCE, PA 15055-1018 • WWW.BLACKBOX.COM
TECH SUPPORT & ORDERING: 724-746-5500 • FAX: 800-321-0746
