724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 11
Chapter 2: Overview
Table 2-1. Front panel components.
Number
Component
Description
1
Power Switch
The power switch turns the unit on and off. The LED will light red to indicate that the switch is on
and is receiving power. The switch will remember that last state during a power cycle. When
power is removed and restored, the last configuration will be used.
2
Output Status Display
Each output (destination) channel shows which input (source) is assigned.
3
Function Key — RECALL
The system will show previously stored presets, up to a total of 16. Presets are stored in local
memory using Source keys 1 through 8 or Destination keys 1 through 8 as the memory preset
location.
• Press the RECALL button.
• Press 1 through 8 in either Source or Destination row.
• Press ENTER. The preset configuration will execute. Operation completes.
NOTE: Operation will abort if no keys are pressed within 5 seconds.
4
Function Key—MEMORY
The system will store presets, up to a total of 16. Presets are stored in local memory using
Source keys 1 through 8 or Destination keys 1 through 8 as the memory preset location.
• Configure desired matrices.
• Press the MEMORY button.
• Press 1 through 8 on either Source or Destination row.
• Press ENTER to ready memory location.
• Or press MEMORY again to cancel operation.
Operation completes.
NOTE: Operation will abort if no keys are pressed within 5 seconds.
5
Function Key — LOCK
• Press and hold the LOCK button for two seconds to lockout the front panel.
• Press and hold the LOCK button for two seconds to re-enable the front panel.
6
EDID Mode Select Buttons
Select EDID mode using Buttons #1 and 2.
7
Source Select Buttons
Separate inputs 1 through 8 select buttons are provided for each source selection.
8
Function Key — EDID
Press EDID to select new EDID mode and select source button #1 or #2 to change embedded EDID
mode.
Press the Destination number to learn EDID. The Destination EDID has been learned.
Press the Destination number multiple times to switch between local and HDBaseT EDID.
