724-746-5500 | blackbox.com
Page 18
724-746-5500 | blackbox.com
Chapter 4: Operation
4. Operation
4.1 EDID Setup
Table 4-1. EDID function setup for HDMI matrix switch: change the EDID setup.
Step
Number
Action
Result
Step 1
Press the EDID button.
The display will show the currently selected EDID mode.
Step 2
Press the SOURCE #1 or
#2 button row
The button will flash blue and the display will show the current Embedded EDID status.
Step 3
Press the ENTER button
Set EDID mode. The switch will return to operation mode.
NOTE: Operation will abort if no keys are pressed within five seconds.
4.2 RESET
Table 4-2. Reset function for HDMI matrix switch.
RESET
EDID return to factory default
To Reset EDID mode:
Press EDID > RECALL > ENTER
1. Reset to the factory default (1080p–2CH).
2. Press the EDID button. The LCM will show the current EDID status.
3. Press the RECALL button. The LCM will show the RESET EDID.
4. Press the ENTER button to confirm the entries. The EDID will return to FSS mode and resolution 1080p-2CH.
