Page 30
724-746-5500 | blackbox.com
Chapter 4: Control Operations
Table 4-2. Commands for the main unit.
Command
Description
/*Type;
Ask for the model’s information.
/%Lock;
Lock the keyboard of the control panel on the Matrix.
/%Unlock;
Unlock the keyboard of the control panel on the Matrix.
/^Version;
Ask for the version of firmware.
/:MessageOff; Turn off the feedback command from the COM port. It will only
show “switcher OK.”
/:MessageOn;
Turn on the feedback command from the COM port.
Undo.
Cancel the previous operation.
Demo.
Switch to the “demo” mode, 1->1, 2->2, 3->3 … and so on.
[x]All.
Transfer signals from the input channel [x] to all output channels.
All#.
Transfer all input signals to the corresponding output channels,
respectively.
All$.
Switch off all the output channels.
[x]#.
Transfer signals from the input channel [x] to the output channel [x].
[x]$.
Switch off the output channel [x].
All@.
Switch on all the outputs.
[x]@.
Switch on output [x].
[x1]V[x2].
Transfer the video signals from the input channel [x1] to the output
channel [x2].
[x1]A[x2].
Transfer the audio signals from the input channel [x1] to the output
channel [x2].
[x1]B[x2].
Transfer signals from the input channel [x1] to the output channel
[x2].
Status[x].
Connect the input channel to the output channel [x].
Status.
Connect the input channel to the output channels one by one.
Save[Y].
Save the present operation to the preset command [Y]. [Y] ranges
from 0 to 9.
Recall[Y].
Recall the preset command [Y].
Clear[Y].
Clear the preset command [Y].
