Black Box ACX4000, Руководство пользователя

Страница: 70 / 119

ACX4000
70
Control commands
In Single head KVM- Switch operating mode, the following control commands are allowed:
•
STX, 0x40, 0x80, ETX Acknowledgement of the system info
•
STX, 0x45, ETX Reset on factory settings
•
STX, 0x54, ETX Reset the Cross point- Switch
•
STX, 0x4F, 0x81, < Loc-No>, ETX
S
witch (local-)input to (remote-)output, the
existing connection is disconnected at the
same time
•
STX, 0x66, 0x80, <Macro-No>, ETX Save switching status to macro
•
STX, 0x67, 0x80, <Macro-No>, ETX
L
oad switching status from macro
where:
< Loc-No> 7Bit date 1 to 7
<Macro-No> 7Bit date 1 to 8
Examples:
STX, 0x54, ETX Reset the switch and set the connections as a function of
SW7 (see above)
STX, 0x40, 0x80, ETX Read the system info (version number) from the switch
STX, 0x47, 0x81, 0x84, ETX Switch console (Remote Unit) to (Local Unit) CPU 4
STX, 0x47, 0x81, 0x85, ETX Switch console (Remote Unit) to (Local Unit) CPU 5
(existing connection to CPU 4 is disconnected)
STX, 0x66, 0x80, 0x81, ETX Save active switching status as macro 1
STX, 0x54, ETX Reset the switch and set the connections as a function of
SW7 (see above)
STX, 0x67, 0x80, 0x81, ETX Call macro 1: the console (Remote Unit) is re-connected
to (Local Unit) CPU 5