Black Box ACX4000, Руководство пользователя

Страница: 54 / 119

ACX4000
54
Setup
There are no other setups available in ‘Multiplex-Repeater’ operating mode.
Operation
In operating mode ‘Multiplex-Repeater’ the following operations are possible:
By serial interface
You can find the allocation of the serial interface under “Serial Interface (external
switchbox) DCE” on page 103 . A standard cable RJ45 / DB9 to the CPU is included in
delivery.
For the complete communication protocol and an explanation of the control characters please
see
Appendix D: Protocol for command mode
For communication, please set up the format of the serial data communication to:
115,2K,8,1,NO
(115,2 KBAUD, 8 Data bit, 1 Stop bit, NO parity)
Control commands
In the ‘Multiplex-Repeater’ operating mode, the following commands are allowed:
•
STX, 0x40, 0x80, ETX Acknowledgment of the system information
•
STX, 0x54, ETX Reset of the Multiplex- Repeater
Serial Interface
(RS232)