Black Box ACU7017A, Руководство пользователя

Страница: 16 / 25

CHAPTER 6 OPERATION
15
6. Operation
Operation of your system is no different than having your keyboard,
monitor, and mouse connected directly to a PC or KVM switch. The only
difference is they can be up to 300 feet away. You can operate your system
normally, programs can be executed, maintenance can be performed, and
any operation normally performed can be done with virtually no derogation
in video quality and performance.
If your ServSwitch Brand Mini KVM Extender is connected to a ServSwitch,
you can access the switch and perform set-up and configuration functions,
switch to a connected computer and fully control that computer.
6.1 Keyboard Commands
The ServSwitch Brand Mini KVM Extender can provide additional
information and fine tune the video using simple keyboard commands. To
execute a keyboard command (shown below) type and release the attention
key, then type the appropriate command key within two seconds.
Command Description
Left Ctrl, Left Shift, e: Perform cable length measurement; adjusts gain/equalization
Left Ctrl, Left Shift,
ke: Increase the video gain by 1
Left Ctrl, Left Shift,
keyboard -: Decrease the video gain by 1.
Left Ctrl, Left Shift,
: increase the video equalization by 1
Left Ctrl, Left Shift,
keypad -: Decrease the video equalization by 1
Left Ctrl, Left Shift, k Saves any changes made
Left Ctrl, Left Shift, i*
(See * Below) Sends Transmitter, CPLD, and receiver firmware version to a
text editor on the CPU the unit is connected. Firmware is
reported as follows:
Transmitter = hxxy,
CPLD = yx,
Receiver = dxxy:
Where x is a decimal digit, and y is an alphabetic character
Left Ctrl, Left Shift, g*
(See * Below) Send the most recent gain, equalization, cable length, and
autotdr status to a text editor on the CPU the unit is connected
* CAUTION: DO NOT EXECUTE THESE COMMANDS WITHOUT A
TEXT EDITOR ACTIVE. A text editor such as notepad must be started and
selected prior to executing these keyboard commands.