Black Box ACU7017A, Руководство пользователя

Страница: 10 / 25

CHAPTER 2: Quick Start
9
2. Quick Start
2
.1 Installation
Installing your ServSwitch Brand Mini CATx extender is a very easy and
simple process.
First connect the remote unit to your KVM stations keyboard, monitor,
and mouse cables. Also connect the power adapter to the remote unit.
NOTE: DO NOT APPLY POWER TO THE REMOTE UNIT AT THIS
TIME
Next connect the local unit to your computer’s keyboard, monitor, and
mouse ports. Depending on the type of equipment, this may be PS/2 or
USB keyboard and mouse ports.
Next, connect the remote unit to the local unit with up to 300 feet of
CATx cable.
Last, initially apply power to the system in the following sequence:
1
st
– Turn on the remote KVM monitor
2 nd – Apply power to the remote ServSwitch Brand Mini KVM extender
3
rd
– Boot the PC
Applying power to the remote unit with power ON the remote KVM
monitor assures that the DDC information from the connected monitor is
read properly.
The ServSwitch Brand will automatically set-up the configuration for
optimum video, automatically compensate for cable lengths and transmit
keyboard and mouse signals to the local unit.
The LED indicators on each unit show the link status and data flow.
If the LED blinks every ½ second no link is detected, check the CATx
connections.
If the LED is briefly blinking every 3 seconds a Link has been detected
and operation is normal.
Figure 1 shows an example of typical installation using the USB model.