set reAuthPeriod
Syntax: set reAuthPeriod <port-range> <sec>
Description: A constant that defines a nonzero number of seconds between the Supplicant’s periodic
reauthentication.
Argument:
<port range> : syntax 1, 5–7, available from 1 to 12
<sec> : timer, range 1–65535
Possible value:
<port range> : 1 to 12
<sec> : 1–65535, default is 3600
Example:
Giga Switch(802.1X)# set reAuthPeriod 2 3600
set serverTimeout
Syntax: set serverTimeout <port-range> <sec>
Description: A timer used by the backend authentication state machine determines timeout conditions in the
exchanges between the Authenticator and the Supplicant or Authentication Server. (A state machine is a
service within the switch that monitors connections and times them out when the time reaches a set maximum
time.) The initial value of this timer is either suppTimeout or serverTimeout, as determined by the backend
Authentication state machine’s operation.
Argument:
<port range> : syntax 1, 5–7, available from 1 to 12
<sec> : timer, range 1–65535
Possible value:
<port range> : 1 to 12
<sec> : 1–65535, default is 30
Example:
Giga Switch(802.1X)# set serverTimeout 2 30
CHAPTER 5: CLI Management
99
