Black & Decker X715, Руководство пользователя

Страница: 4 / 28

English
4

When not in use, the appliance should be
stored in a dry place. Children should not have
access to stored appliances.
Inspection and repairs

Before use, check the appliance for damaged
or defective parts. Check for breakage of parts,
damage to switches and any other conditions
that may affect its operation.

Do not use the appliance if any part is
damaged or defective.

Have any damaged or defective parts repaired
or replaced by an authorised repair agent.

Before use, check the power supply cord for
signs of damage, ageing and wear.

Do not use the appliance if the power supply
cord or mains plug is damaged or defective.

If the power supply cord or mains plug is
damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord and
do not attempt to repair it yourself.

Never attempt to remove or replace any parts
other than those specified in this manual.

Do not attempt to repair the appliance. Take it
to your nearest Black & Decker-owned or
authorised Service Centre for repair.
Electrical safety
This product must be earthed. Always
check that the power supply
corresponds to the voltage on the rating
plate.

Power plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (Class 1)
appliances. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
Extension cables & Class 1
product

A 3-core cable must be used as your appliance
is earthed and of Class 1 construction.

Up to 30m (100ft) can be used without loss of
power.
To avoid the risk of electric shock, do
not immerse the cord, plug or appliance
in water or other liquid.

If the supply cord is damaged, it must be
replaced by the manufacturer or an authorized
Black & Decker Service Center in order to
avoid a hazard.
Additional safety instructions for
irons

Always route the cord carefully to avoid a
tripping hazard.

Do not use the appliance near water.

Do not place the appliance near heat sources
or directly under cabinets. Do not use the
appliance in the presence of explosive or
flammable materials.

The filling aperture must not be opened during
use.

Steam may escape from the soleplate.

Surfaces may be hot during use and during the
cool down period.

Set the temperature control dial to the min
position before plugging in or out.

Let the appliance cool down before leaving it
unattended and before cleaning or inspecting
any parts of the appliance.

The power supply cord should not touch the
hot soleplate during use or during the cool
down period.

Do not touch the soleplate until it has cooled
down.