7
Important:
Always carry the slow cooker from the
cooking base handles . Make sure to securely grasp
the bottom portion of the handles to avoid the handles
separating or unlocking unexpectedly while carrying .
(D) Never lift the slow cooker by the lid handle .
4 . To unlock, push up the top part of the handles into
the open, unlocked position . Then swing the locking
wires down and around to the cooking base .
Important:
When unlocking, keep your fingers out from between the top part
of the handles and the edge of the stoneware .
OPERATING YOUR SLOW COOKER
1 .
Add ingredients to the stoneware pot and cover with glass lid .
2 . Plug in the appliance . The main control display will blink “00:00” and the warm function
light will also blink . This indicates that the appliance is ready to set for cooking .
Note:
If left in this state without cooking for 5 minutes, the slow cooker will go into
sleep mode . Press the Power button and the slow cooker will go to active mode .
3 . Choose either to Set a Cook Time or to Stay On . You may toggle between the
two options by pressing the Timer button .
OPTION 1, SET A COOK TIME:
This option cooks at Low or High for a specific amount of time . After the cooking
time is complete, it switches to Warm for up to 4 additional hours . (If Warm is
selected for the initial temperature, the unit will shut off without any additional time
spent at Warm .)
a .
Press the Select button until the setting you want lights up (Low or High) .
b .
Press the arrows up or down until the desired time shows on the display .
The slow cooker timer sets in 30 minute increments .
c .
Press the Start button . The slow cooker will beep and then begin heating .
d .
When the cook time is done, there will be two beeps and the unit will
switch automatically to Warm . It will stay on Warm for up to 4 hours . The
Warm function will automatically shut off after 4 hours .
e .
When ready to serve, press and hold the Power button for 3 seconds to
turn the appliance off . Unplug .
D
