EN
G
LI
SH
EN
G
LI
SH
ENGLISH
Thank you for purchasing this Price Pfi ster product. All Price Pfi ster products are carefully engineered, and factory tested to provide long
trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions. If
you have any questions regarding your product installation call 1-800-Pfaucet (1-800-732-8238)
.
1 BEFORE PROCEEDING
WARNING:
Read all the instructions completely before proceeding. Price
Pfi ster recommends calling a professional if you are uncertain about installing
this product!
This product should be installed in accordance with all local and state plumbing
and building codes.
WARNING:
This product has been designed for use with the Price Pfi ster
0X8 series pressure balancing valve. It will not work with any other product.
Please review the 0X8 valve installation instructions before installing this
product
3 TOOLS RECOMMENDED
• PTFE plumber's tape or thread sealant
• Philips head screwdriver
• Adjustable wrench • Pipe wrench
• Flashlight
• Cloth
Your installation will require a pipe nipple for the spout installation as well as
other additional tools.
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included.
A
Gasket Flange
B
Trim Flange
C
Washer
D
Retainer Sleeve
E
Spout
If any of these items are missing, please contact Price Pfi ster Consumer
Service at 1-800-Pfaucet (1-800-732-8238).
5 WORK AREA DIMENSIONS
Verify that the hole sizes and positions in the wall are correct.
6 PLASTERGUARD OPTIONS
A
. For installation using plasterguard, knock out Center Section (
6B
) from Plasterguard
(
6A
). The use of plasteguard is optional for standard installations.
B
. For installation without plasterguard, remove Screws (
6C
), and Plasterguard
(
6A
).
INSTALLATION STEPS
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found near the water meter. If you are replacing an existing unit, remove
the old unit and clean the mounting surface thoroughly.
4
5
6
3
2
30”
Tub
8” Min.
4
3
/
4
” Dia.
4” Dia. for Thin
Wall Installation
1
1
/
44
” Dia.
A
B
A
B
C
D
6B
6A
6C
6A
E
Содержание Price Pfister Portland R89-5 Series
Страница 11: ...FRANÇAIS FRAN FRAN 11 ...
