3
• Position charging adapter cords so they do not become entangled or become a safety hazard. Keep charging
adapter cords away from sharp edges.
• Use in a dry location only.
• Do not open body casing. There are no user-serviceable parts inside.
• To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting from the
120 Volt AC Charger.
• Do not attempt to charge the unit if the 120 Volt AC Charger plug is damaged— return the unit to
manufacturer for repair.
INTRODUCTION
Thank you for choosing the
Black & Decker
®
V-1 Million Power Series
™
Spotlight.
Please read this
guide carefully before use to ensure optimum performance and to avoid damage to the unit.
FEATURES
• Powerful, focused quartz halogen beam
• Protective rubber safety guard (bezel) around lens
• Rubber safety cap protects battery compartment
• Comfortable pistol grip
• Battery Status LED Indicator
• UL listed, built-in 120 volt AC charger that works with a standard household extension cord (not included)
• 12 volt DC charging adapter included
• Rechargeable, non-spillable, sealed lead acid battery
CHARGING/RECHARGING THE SPOTLIGHT
This unit is shipped in a partially charged state. Charge unit BEFORE first use using the 120 Volt AC
Charger for 12-14 hours or until the red Battery Status LED flashes. Charge after each use until red
LED flashes.
Charging/Recharging Using the 120 Volt AC Charger and a Standard Household
Extension Cord (not included)
Plug a standard North American 120 volt AC extension cord (not included) into the 120 Volt AC
Charger on the back of the unit.
Make sure the Spotlight is OFF (the Trigger Lock is in the OFF position and the Trigger is not depressed).
BUILT-IN 120V AC
CHARGER
BATTERY STATUS LED
INDICATOR
TRIGGER ON/OFF
RUBBER BEZEL
DC CHARGING
PORT
120 VOLT AC CHARGER
(BACK OF UNIT)
BATTERY STATUS LED
INDICATOR
TRIGGER LOCK
PISTOL GRIP HANDLE
QUARTZ HALOGEN BULB
SL102B_ManualEN_051007.qxp 5/10/07 9:13 AM Page 3
