12
13
Common Power Output Problems
Possible Cause
Recommendation
Battery voltage
below 11.0 volts
Recharge battery or check DC
power supply.
Equipment being
operated draws
too much power
Reduce load to maximum 10
watts. Although this unit has two
outlets, some phones and tablets
can draw 10 watts from a single
outlet. Connecting another device
to the second outlet in this case
would create an overload condition
and cause the charger to shut
down.
Charger in
thermal shutdown
condition
Allow charger to cool down.
Ensure there is adequate
ventilation around the load is no
more than 10 watts for continuous
operation.
ACCESSOrIES
Recommended accessories for use with your tool are
available from the manufacturer. If you need assistance
regarding accessories, please contact the manufacturer
at 1-877-571-2391.
WARNING:
The use of any accessory not
recommended for use with this appliance could be
hazardous.
trOublESHOOtING
Common Problems
Problem
Explanation/Recommendation
Power/Fault LED
Indicator is not lit
•
Check that all the DC
connections are connected
correctly.
•
Check the tightness of the DC
connection.
Note:
Make sure that your
accessory outlet is “live”. You
may need to turn the ignition
key to the accessory position.
Power/Fault LED
Indicator Lights Red
When the Power/Fault LED
Indicator turns from green
(indicating the unit is powered)
to red, a fault condition is
present and the unit will
automatically shut down. See
the Protective Features Section
of this Instruction Manual
and Common Power Output
Problems in the following
section.
PIUSB2B_ManualENFRSP_050813.indd 12-13
5/14/2013 4:17:07 PM
