Common Power Output Problems
Possible Causes
Recommendations
Battery voltage below 10.0 volts
Recharge battery or check DC power supply.
Equipment being operated draws too much power
Reduce load to maximum 100 watts.
Inverter in thermal shutdown condition
Allow inverter to cool down. Ensure there is adequate
ventilation around the unit, and the load is no more
than 100 watts for continuous operation.
AC output is shorted
Unplug the AC appliance. Disconnect the unit from any
12 volt DC power source, then reconnect the unit
BEFORE plugging the appliance back in.
SERVICE INFORMATION
All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and
reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts,
contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page
directory under "Tools—Electric" or call:
1-800-544-6986
or visit
www.blackanddecker.com
.
FULL TWO-YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship.
The defective product will be replaced or repaired at no charge in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased
(provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s
policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with
the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service
Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and
authorized Service Centers are listed under "Tools-Electric" in the yellow pages of the phone directory and on
our website www.blackanddecker.com.
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have
other rights which vary from state to state or province to province. Should you have any questions, contact the
manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT:
If your warning labels become illegible or are missing, call 1-800-544-
6986 for a free replacement.
SPECIFICATIONS
Output Power:
100 watts continuous
Input:
13.8 volts DC, 8 amps
Output Voltage:
115 volts AC, 60 Hz
USB Charging Port Output:
5 volts DC 300 mA
Fuse (12 Volt DC Accessory Plug):
10 amp, automotive-blade type
Output Waveform:
Modified Sine Wave (MSW)
Efficiency:
>85%
Low Voltage Audible Alarm:
<10.5 ± 0.3 Volts Input Voltage
Low Voltage Shutdown:
<10.0 ± 0.3 Volts Input Voltage
Operating Temperature:
10-20°C (50-68°F)
Storage Temperature:
0-40°C (32-104°F)
Operating/Relative Humidity:
5-95% non-condensing
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
BD052507
S
ee ‘Tool
s
-Electric’
– Yellow Pa
g
e
s
–
for
S
ervice &
S
ale
s
7
PI100ASB_ManualEN_052507.qxp 5/25/2007 12:22 PM Page 7
