appliance with which it was
supplied. Other batteries could
burst, causing personal injury and
damage.
u
Never attempt to charge nonre-
chargeable batteries.
u
If the supply cord is damaged, it
must be replaced by the manufac-
turer or an authorised Black &
Decker Service Centre in order to
avoid a hazard.
u
Do not expose the charger to water.
u
Do not open the charger.
u
Do not probe the charger.
u
The appliance/battery must be
placed in a well ventilated area
when charging.
Electrical safety
Symbols on the charger
Read all of this manual carefully before using the
appliance.
This tool is double insulated; therefore no earth wire is
required. Always check that the power supply corre-
sponds to the voltage on the rating plate.
The charging base is intended for indoor use only.
Only use with charger S003AQ 15
Features
This tool includes some or all of the following features.
1. On/off power switch
2. Removable handle
3. Handle release ring
4. Hose
5. Transparent door
6. LED charging indicator
7. Battery housing
4
12
Z
#
$
S003AQ 15
4
12
Z
#
$
S003AQ 15
4
12
Z
#
$
S003AQ 15
4
12
Z
#
$
S003AQ 15
8. Door latch
9. Bowl release button
10. Removable dust bowl
11. Accessory clip
12. 2-in-1 combi nozzle accessory
13. Crevice tool
14. Charger
15. Charging port
Replacing the filters
The filters should be replaced every 6 to 9 months and whenever
worn or damaged.
Replacement filters are available from your Black & Decker dealer
(cat. no. VF90):
Battery
If you want to dispose of the product yourself, the
battery must be removed as described below and
disposed of in accordance with local regulations.
u
Run the battery down completely.
u
Remove the dust bowl.
u
Remove the two screws from inside the tunnel that the hose
fits into and lift off the battery housing.
u
Detach all lead connections from the battery pack.
u
Carefully remove the cover which hold the battery pack in
place.
u
Remove battery pack and place in suitable packaging to
ensure that the terminals cannot be short-circuited.
u
Take the battery to your service agent or to a local recycling
station.
One removed, the battery cannot be refitted.
Maintenance
Your Black & Decker cordless appliance has been designed to
operate over a long period of time with a minimum of mainte-
nance. Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Warning!
Before performing any maintenance on cordless
appliances:
u
Run the battery down completely if it is integral and then
switch off.
u
Unplug the charger before cleaning it. Your charger does not
require any maintenance apart from regular cleaning.
u
Regularly clean the ventilation slots in your appliance/ charger
using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do not
use any abrasive or solvent-based cleaner.
Protecting the environment
Separate collection. This product must not be disposed
4
12
Z
#
$
S003AQ 15
4
12
Z
#
$
S003AQ 15
ENGLISH
12
