Black & Decker Li4000, Инструкция по эксплуатации

Страница: 11 / 36

11
troubleshooting
Problem Possible cause Possible Solution
• Battery will not charge. • Charger not plugged into • Plug charger into a
a working outlet. working outlet. Refer to
“Important Charging
Notes” for more details.
• Check current at
receptacle by plugging in
a lamp or other appliance.
• Check to see if
receptacle is connected to
a light switch which turns
power off when you turn
out the lights.
• Surrounding air temperature • Move charger and tool
too hot or too cold. to a surrounding air
temperature of above 40
degree F (4,5°C) or below
105 degree F (+40,5°C).
• Tool will not drill. • Torque adjustment collar in • Move collar position to
wrong position. largest screw icon.
• Screws stripping. • Torque adjustment collar • Move collar position to
setting too high. a smaller screw icon.
• Screws not fully seated. • Torque adjustment collar • Move collar position to
setting too low. a larger screw icon.
• Screw holder not holding • Screw is non-ferrous. • Use ferrous screw.
screw.
For assistance with your product, visit our website
www.blackanddecker.com
for the
location of the service center nearest you or call the BLACk+DECkER help line at
1-800-544-6986.
AcceSSoRIeS
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
WARNING:
The use of any accessory not recommended for use with this tool could
be hazardous.
tHe RBRc™ SeAl
The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the
lithium-ion battery (or battery pack) indicates that the costs to recycle the
battery (or battery pack) at the end of its useful life have already been paid
by BLACk+DECkER. In some areas, it is illegal to place spent lithium-
ion batteries in the trash or municipal solid waste stream and the RBRC
program provides an environmentally conscious alternative.
RBRC in cooperation with BLACk+DECkER and other battery users, has established
programs in the United States and Canada to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and conserve natural resources by returning the
tool to an authorized BLACk+DECkER service center for recycling. You may also contact
your local recycling center for information on where to drop off the spent battery, or call
1-800-8-BAtteRy.