ENGLISH • 27
12V MAX* INSTALLATION AND REMOVAL OF
THE BATTERY PACK (Fig. K)
To install battery pack: Insert battery pack into the flashlight,
until an audible click is heard as shown in Fig. K(a).
To remove battery pack: Depress the battery release
button as shown in Fig. K(b)and pull battery pack out of
the flashlight.
12V MAX* PIVOTING THE 10 LED LIGHT
HOUSING (FIG. L)
The LED light housing (2) can be pivoted by moving lifting
it to different positions within the 115 degree pivot range.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never
let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location
nearest you, or visit us at www.BlackandDecker-la.com
SPECIFICATIONS
LD112
Power
12V
Max*
No-Load Speed
0 - 600 rpm
Chuck
10mm (3/8”)
Torque
11.3Nm (100 in-lbs)
BATTERY
LB12
Voltage
12V
Max*
Battery type
Lithium Ion
CHARGER
LCS12
Input
0.100A
AR
220V ~ 50Hz
B2C
220V ~ 50Hz
B3
120V ~ 60Hz
BR
127V/220V ~ 60Hz
Output
0.330A 12V
Charging Time
3 - 5 hours
* Maximum initial battery pack voltage (Measured without
a workload) is 12 volts. Measured under a workload,
nominal voltage is 10.8.
