17
H
G
E
F
STORAGE
Rip fence and miter gauge (Figure F)
Storage for the rip fence (1) and miter
gauge (2) are located on the left side of
the saw housing.
Push stick (Figure G)
A storage holder for the push stick (1) is
located on the left side of the saw housing.
• Store the push stick (1) by hanging it
on the holders (2) through the holes (3)
of the push stick (1).
Folding
Transporting
Extra saw blade and blade wrenches
(Figure H)
• Loosen and remove the knob (1) on the
right side of the saw housing.
• Place extra blades (not included), and
blade wrenches (2) onto the arbor.
Installing the power cord storage
clamps (Figure I)
• Attach the power cord storage clamp (1)
into the hole set on the rear side of the
saw housing with screw (2) and nut (3).
NOTE: The nut is placed inside
the saw housing.
• Repeat for the other clamp, to be
located on the bottom right on
saw housing.
Power cord (Figure J)
Wrap the power cord (1) as shown. Do
not wrap the power cord around the
dust port (2).
2
3
2
1
1
1
2
I
3
1
2
