EnGLIsH • 15
Warning!
Cutting elements continue to rotate after the
motor is switched off.
► Be familiar with the controls and the proper use of the
appliance.
► Before use, check the power supply cord and extension
cord for signs of damage, ageing and wear. If a cord
becomes damaged during use, disconnect the cord
from the mains supply immediately.
Do not touch the
cord before disconnecting the supply.
► Do not use the appliance if the cords are damaged
or worn.
► Wear stout shoes or boots to protect your feet.
► Wear long trousers to protect your legs.
► Before using the appliance, check that your cutting path
is free from sticks, stones, wire and any other obstacles.
► Only use the appliance in the upright position, with the
cutting line near the ground. Never switch the appliance
on in any other position.
► Move slowly when using the appliance. Be aware that
freshly cut grass is damp and slippery.
► Do not work on steep slopes. Work across the face of
slopes, not up and down.
► Never cross gravel paths or roads while the appliance
is running.
► Never touch the cutting line while the appliance is running.
► Do not put the appliance down until the cutting line has
come to a complete standstill.
► Use only the appropriate type of cutting line. Never use
metal cutting line or fishing line.
► Be careful not to touch the line trimming blade.
► Take care to keep the mains cable away from the
cutting line. Always be aware of the position of the cable.
► Keep hands and feet away from the cutting line at all
times, especially when switching on the motor.
► Before using the appliance and after any impact, check
for signs of wear or damage and repair as necessary.
► Never operate the appliance with damaged guards or
without guards in place.
► Take care against injury from any device fitted for
trimming the filament line length. After extending new
cutter line always return the machine to its normal
operating position before switching on.
► Always ensure that the ventilation slots are kept clear
of debris.
► Do not use the lawn trimmer (edge trimmer), if the
cords are damaged or worn.
► Keep extension cords away from cutting elements.
Labels on appliance
The following warning symbols are found on the appliance:
Read the manual prior to operation.
Wear safety glasses or goggles when operating
this appliance.
Wear suitable ear protectors when operating this
appliance.
Always remove the plug from the socket before
inspecting a damaged cable. Be careful not to use
your strimmer if the cable is damaged.
Beware of flying objects. Keep bystanders away
from the cutting area.
Do not expose the appliance to rain or high
humidity.
Directive 2000/14/EC guaranteed sound power.
Electrical safety
This appliance is double insulated; therefore no
earth wire is required. Always check that the power
supply corresponds to the voltage on the rating
plate.
► If the supply cord is damaged, it must be replaced by
the manufacturer or an authorised Black & Decker
Service Centre in order to avoid a hazard.
► Electric safety can be further improved by using a
highsensitivity 30 mA Residual Current Device (RCD).
FEAtUrEs (Fig. A)
This appliance includes some or all of the following features.
1.
On/off switch
2.
Handle
3.
Cable restraint
4.
Power inlet
5.
Second handle
6.
Guard
7.
Line trimming blade
8.
Cutting line
9.
Spool housing
10.
Head
ADDItIonAL sAFEty InstrUCtIons
For GrAss trIMMErs
Содержание GL360
Страница 2: ...FIG A FIG B FIG C FIG D FIG E FIG F ...
Страница 3: ...FIG G FIG H FIG I FIG J ...
