Black & Decker DVC320B, Руководство пользователя

Страница: 8 / 64

8
ENGLISH (Original instructions)
Other batteries could burst, causing
personal injury and damage.
u
Never attempt to charge
nonrechargeable batteries.
u
If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
u
Do not expose the charger to water.
u
Do not open the charger.
u
Do not probe the charger.
u
The appliance/tool/battery must be
placed in a well ventilated area when
charging.
Electrical safety
Your charger has been designed for a
specific voltage. Always check that the
mains voltage corresponds to the voltage
on the rating plate. Never attempt to
replace the charger unit with a regular
mains plug.
Symbols on the charger
Read all of this manual carefully
before using the appliance.
#
This tool is double insulated;
therefore no earth wire is
required. Always check that the
power supply corresponds to
the voltage on the rating plate.
$
The charging base is intended
for indoor use only.
Labels on appliance
The following symbols appear on this ap-
pliance along with the date code.
Read all of this manual care-
fully before using the appli-
ance
N893139 / JOD-S-150050**
Only use with charger
N893139 / JOD-S-150050**
Features
This tool includes some or all of the following features.
1. Dust bowl cover release button
2. Dust bowl
3. Prefilter
4. Filter
5. Battery pack
6. Battery pack release button
7. Crevice nozzle
8. Brush
9. Charging stand
10. Charging adapter
11. Power button
12. Unit body
Operation
u
Press the Power Button (11) as shown in figure A
u
Unit starts in high speed. press button again to slow
speed.
u
Press the Power Button once more, the appliance stops
working.
Attaching Accessories
u
If you need to use the accessory Brush (8), insert the
Brush into the air inlet as shown in figure B and then start
the appliance.
u
If you need to use the accessory Crevice Nozzle (7), insert
the Crevice Nozzle into the air inlet as shown in figure B
and then start the appliance.
Charging
u
Plug the Charging Adapter (10) into the mains power
socket as shown in figure C.
u
Place the appliance into the charging stand (9) so that
the socket in the appliance is engaged into the plug of the
charging adapter as shown in figure D.
u
The charging LED indicator turns on and the appliance
starts to charge. When the appliance charges fully, the
charging LED indicator turns off.
Warning! Do not charge the battery off the unit to protect from
contamination.