10
ENGLISH
Insert the dust extraction adaptor (23) into the saw
dust outlet (15).
Connect the vacuum cleaner hose to the
adaptor.
Hints for optimum use
As some splintering along the line of cut on the
top side of the workpiece cannot be avoided, cut
on the side where splintering is acceptable.
Where splintering is to be minimised, e.g. when
cutting laminates, clamp a piece of plywood onto
the top of the workpiece.
Accessories
The performance of your tool depends on the ac-
cessory used. Black & Decker and Piranha acces-
sories are engineered to high quality standards and
designed to enhance the performance of your tool.
By using these accessories you will get the very best
from your tool.
Maintenance
Your Black & Decker corded/cordless appliance/tool
has been designed to operate over a long period of
time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool
care and regular cleaning.
Warning!
Before performing any maintenance on
corded/cordless power tools:
Switch off and unplug the appliance/tool.
Or switch off and remove the battery from the ap-
pliance/tool if the appliance/tool has a separate
battery pack.
Or run the battery down completely if it is integral
and then switch off.
Unplug the charger before cleaning it. Your
charger does not require any maintenance apart
from regular cleaning.
Regularly clean the ventilation slots in your ap-
pliance/tool/charger using a soft brush or dry
cloth.
Regularly clean the motor housing using a damp
cloth.
Do not use any abrasive or solvent-based
cleaner.
Regularly open the chuck and tap it to remove
any dust from the interior (when fi tted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fi tted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in
the new plug.
Connect the blue lead to the neutral terminal.
Warning!
No connection is to be made to the earth
terminal. Follow the fi tting instructions supplied with
good quality plugs. Recommended fuse: 13 A.
Protecting the environment
Separate collection. This product must
not be disposed of with normal household
waste.
Should you fi nd one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recy-
cled and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collec-
tion of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once they
have reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest au-
thorised repair agent by contacting your local
Black & Decker office at the address indicated
in this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on the
Internet at:
www.2helpU.com
Technical data
CD601
TYPE 2
CD602
TYPE 2
Input voltage
V
AC
230
230
Power input
W 1,100
1,150
No-load speed
min
-1
5,000
5,000
Max. depth of cut
mm 55
55
Blade diameter
mm 170
170
Blade bore
mm 16
16
Blade tip width
mm 2.6
2.6
Weight
kg 4.7
4.7
