Black & Decker BWAC08WTB, Инструкция по эксплуатации

Страница: 18 / 28

2.Operation Safety
Open Flames Prohibited Ventilation Necessary
Open Flames Prohibited
Mind Static Electricity Must Wear Protective Clothing
and anti-static gloves Don't use mobile phone
3.Installation Safety
Please note that:
1. The installation site should be in a well-ventilated location.
2. The sites for installing and maintaining an air conditioner using Refrigerant R32
should be free from open fire or welding, smoking, drying oven or any other heat
source higher than 548°C which easily produces open fire.
3. When installing an air conditioner, it is necessary to take appropriate anti-static
measures such as wearing anti-static clothing and/or gloves.
4. It is necessary to choose a site convenient for installation or maintenance wherein
the air inlets and outlets of the indoor and outdoor units should be not surrounded
by obstacles or close to any heat source or combustible and/or explosive
environment.
5. If the indoor unit incurs a refrigerant leak during the installation, all the personnel
should go out till the refrigerant leaks completely for 15 minutes. If the product is
damaged, you must return the damaged product back to the manufacturer; it is
prohibited to weld the refrigerant pipe or conduct other changes to the product.
6. It is necessary to choose a place where the inlets and outlets air of the indoor unit
is even.
7. It is necessary to avoid using in places where there are other electrical products,
power switch plugs and sockets, kitchen cabinets, beds, sofas and other valuables
that are placed right under the indoor unit, as this prevents mechanical damage
from occurring.
•
Refrigerant Leak Detector
•
Appropriate Installation
Location
The left picture is the schematic diagram
of a refrigerant leak detector.
INTRODUCTION TO REFRIGERANTS R32
1.Site Safety
SET UP & USE
Page 18