Black & Decker BWAC08WTB, Инструкция по эксплуатации

Страница: 14 / 28

SET UP & USE
3. Extend the side panels out against the window frame. (See Fig. 7)
4. Drive three 1/2” locking screws through filler panel holes into window sash on both
left and right sides. (See Fig. 8 & 9)
5. Place the frame lock between the frame extensions and the window sill. Drive 3/4”
locking screws through the frame lock and into the sill on both left and right sides.
(See Fig. 10)
NOTE: To prevent window sill from splitting, drill 1/8” pilot holes before driving
screws.
6. To secure lower sash in place, attach right angle sash lock with two 3/4” screws.
(See Fig. 11)
7. Cut foam seal strip and insert in the window space between the upper and lower
sashes.
(See Fig. 12)
Fig. 7
Fig. 10
Fig. 9
Fig. 11 Fig. 12
Fig. 8
Page 14