Black & Decker BEAC75, Инструкция по эксплуатации

Страница: 14 / 50

Page 14
TROUBLESHOOTING & WARRANTY
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
Appliance does not turn on Appliance is not plugged in
Check that appliance is
plugged into a working outlet
No airflow when the unit is
powered on
No water in the tank
Fill the water tank with water.
Refer to EVAPORATIVE AIR
COOLER SET-UP section of
this manual.
The water tank is not installed
properly. Make sure the water tank is
securely in place. Refer to
EVAPORATIVE AIR COOLER
SET-UP section of this manual.
No Cooling
There is not enough water in
the tank Refill the water tank. Refer to
EVAPORATIVE AIR COOLER
SET-UP section of this manual.
The Cooling/Humidity but-
ton was not pressed Press the Cooling/Humidity
button to activate.
The pump is not working. Contact the BLACK + DECKER
Customer Service Center
Not Cooling Enough
The cooling pad is not
sufficiently saturated with
water.
Operate the unit for 2-3
minutes to make sure the
cooling pad becomes
saturated with water. If speed
3 was selected the unit will
operate in speed 2 until the
cooling pad is saturated and
revert back to speed 3.
The water tank in the water
tank is not cool. Use the optional ice packs to
cool the water
Water is coming out of the
vents in Cooling/Humidity
Mode
The cooling pad may be
clogged with residue or
debris. Clean the cooling pad
by rinsing it in water and
allowing it to thoroughly dry.
Refer to CLEANING AND
MAINTENANCE section of this
manual.
SPECIFICATIONS
BEAC75
• Unit Dimensions (W x D x H): 15.8” x 13.6” x 36.6”
• Net Weight: Approx. 17.6 lb