10
after use - fig. Q
• Return the handle tube (4) to the upright position and turn the
steam mop ‘OFF’.
• Place the steam mop on the resting mat (7) and wait until the
steam mop cools down. (approximately five minutes)
• Unplug the steam mop from the wall outlet.
• Empty the water tank (3).
• Remove the hand-held unit and empty the water tank.
• Remove the cleaning pad (6) and wash it so that it is ready for the
next use. (Take care to follow the wash care instructions printed
on the cleaning pad).
• Wrap the electric cord around the cord hooks (26 & 27).
notIce:
The top cord hook rotates to easily release the
cord ready for next use.
• Place steam mop on the resting mat for storage.
notIce:
With the handle tube in the upright position, the cord neatly wrapped
around the cord hooks your steam mop will stand on its own for storage. Alternatively
there is a hanging bracket built into the hand grip which will allow your steam mop to be
hung from a suitable hook on the wall. Always ensure that your wall hook is capable of
supporting the weight of the steam mop safely.
MaIntenance and cLeanInG
Your Black & Decker corded appliance has been designed to operate over a long period
of time with a minimum of maintenance. Continuous satisfactory operation depends
upon proper appliance care and regular cleaning.
WarnInG:
Before performing any maintenance or cleaning on corded appliances
switch off and unplug the appliance.
• Clean your appliance using a soft damp cloth. Never let any liquid get inside the
appliance; never immerse any part of the appliance into a liquid. IMPortant: To
assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment
should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
• For stubborn marks you can use a mild solution of soap and water to dampen your cloth.
care of the cLeanInG Pads
notIce:
Follow the cleaning instructions printed on the label of your cleaning pad.
Wash care instructions
- Machine wash warm 140°F (60°C) - No bleach - No fabric
softener - Air dry only - Allow to dry fully before re-use.
accessorIes
Recommended accessories for use with your appliance are available from your local
dealer or authorized service center. If you need assistance regarding accessories, please
call: 1-800-544-6986.
WarnInG:
The use of any accessory not recommended for use with this
appliance could be hazardous.
trouBLeshootInG
ProBLeM
PossIBLe cause
PossIBLe soLutIon
• Unit will not start.
• Cord not plugged in.
• Plug appliance into a working outlet.
• Main switch not on.
• Turn main switch on.
• Floor head not correctly • Ensure floor head is correctly
fitted.
attached.
• Handle not fitted
• Fit Handle correctly
correctly - LED’s do not
light
up.
• Circuit fuse is blown.
• Replace circuit fuse. (If the
product
repeatedly
causes
the
circuit
fuse
to
blow,
discontinue
use immediately and have it
serviced
at
a
Black
&
Decker
service
center
or
authorized
servicer.)
26
27
Q
