BKI BLF-F, Руководство по установке и эксплуатации

Страница: 33 / 42

Electric Autolift Fryer Maintenance
30
Maintenance
Failure to comply with the maintenance below could result in a serious accident.
Your fryer will need periodic maintenance and servicing. We strongly suggest
that you use only a service company that is authorized by BKI
to do this work.
The restraining device must always be connected when the appliance is in
service. Disconnect for movement, such as servicing or cleaning. Reconnect the
restraint when fryer has been returned to its normal position
The BLF appliance is not intended to be cleaned with a water jet.
Scheduled Maintenance
Use the following table to help manage scheduled maintenance activities.
FREQUENCY PERFORMED BY PART ACTIVITY
Daily User Filter Pad Replace filter pad. Refer to
the procedure in this manual.
User Filter system Filter the shortening using the
procedure in this manual.
User Fryer rear Pull fryer out and wipe down
& clean all surfaces,
especially horizontal, on rear
of fryer.
User Under Fryer Pull fryer out and clean floor
under fryer.
Weekly User Fryer Pot Perform the boil-out
procedure in this manual.
Every 6 Months Authorized BKI
service agent Connections,
Fittings Check for leakage while oil is
pumping.
Authorized BKI
service agent Fryer Pot
Fittings/Connections Check for leakage around fry
pot top deck and fittings
(heaters, hi-limit, thermostat,
etc.).