bk ultrasound Flex Focus 1202, Руководство пользователя

Страница: 15 / 66

Flex Focus 1202 User Guide (BB1756-Q) Safety Information 15
Explosion Hazards
Mechanical
injury
WARNING MS-w1
Be careful to avoid the following potential sources of injury:
•
Parts of the body can be pinched by moveable parts of the equipment, such as the
control panel.
•
Tilting the system can cause it to be unstable and injure someone.
•
Do not lean or sit on the control panel or any other part of the system. The control
panel or monitor can break if subjected to heavy weights or impact.
All parts
must be
stable
WARNING MS-w2
When parts of the equipment can be mounted individually (for example, for use in an
operating room) each part must be securely mounted to a stable support so that it does
not tip, fall or come loose and injure someone.
Don’t drop
the scanner
unit
WARNING MS-w3
To avoid personal injury or damage to the system, if you handle the scanner unit by itself,
make sure you have a firm grip so that you do not drop it. Note that it may be hot.
Don’t push
too hard
WARNING MS-w4
To avoid injury and equipment damage, do not push the system too hard, especially when
you roll the system over an uneven surface. Applying excessive force near the top could
cause the system to overbalance and tilt.
Explosion
hazards
WARNING EH-w1
The equipment is not designed to be used in potentially explosive environments. It should
not be operated in the presence of flammable liquids or gases, or in oxygen-enriched
atmospheres.
There is a possible explosion hazard if the equipment is used in the presence of flammable
anesthetic. The system should be placed at least 25cm (10 inches) from the patient.
The ultrasound system contains a lithium battery. Never remove or replace this battery.
The lithium battery must not be removed except by a BK Ultrasound service
representative.