BJ Take Inc
220 Ramsey Drive Dunnville, ON N1A 0A7
3
of
3
Electrical Connections:
Make the following Electrical Connections:
For 120-277V / 347V
Applications make the following Electrical Connections:
a. Connect the black luminaire lead to the line supply lead
b. Connect the white luminaire lead to the neutral supply lead
c. Connect the green or green and yellow ground lead to the supply ground lead
Dimming Option:
a. Connect the violet dimming positive lead to the supply dimming positive lead
b. Connect the grey dimming negative lead to the supply dimming negative lead
Luminaire
Line or Hot 1
Line - Black
Green
Ground - Green
Neutral or Hot 2
Neutral - White
Violet
DIM (+) Violet
(Dimming Option)
Grey
DIM (+) Grey
For 16/4
both circuits must be connected to the same branch circuit, i.e. turning off the branch circuit protection will turn
off both circuits of the luminaire.
Electrical Disconnect Instructions:
The above electrical connections for the line 1 and neutral are made using the electrical disconnect that is connected to
the LED driver. The connections are made as follows below, note that the disconnect is color coded for circuit wiring.
a. Black to Live
b. White to Neutral
The intended wire sizes are as follows, with an 11-13 mm jacking length.
a. 2 x AWG 18-12
solid wire
per pole
b. 2 x AWG 16-12 <19
stranded wire
per pole
If a wire is connected incorrectly the only way to remove the wire is by twisting the electrical disconnect and pulling firmly
on the incorrect wire.
