BIXOLON SRP-E770III Series Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 63

BIXOLON SRP-E770III Series Скачать руководство пользователя страница 63

SRP-E770III

Copyright

© BIXOLON Co., Ltd. All rights reserved.

This user manual and all property of the product are protected under copyright law.
It is strictly prohibited to copy, store, and transmit the whole or any part of the manual
and any property of the product without the prior written approval of BIXOLON Co., Ltd.
The information contained herein is designed only for use with this BIXOLON product.
BIXOLON is not responsible for any direct or indirect damages, arising from or related to
use of this information.

• The BIXOLON logo is the registered trademark of BIXOLON Co., Ltd.
• All other brand or product names are trademarks of their respective companies or

organizations.

BIXOLON maintains ongoing efforts to enhance and upgrade the functions and quality of
all our products.
In the following, product specifications and/or user manual content may be changed
without prior notice.

Ver. 1.01

- 63 -

«
...
61
62
63

Содержание SRP-E770III Series
































































Отзывы:

Нет отзывов