Ver. 1.04
- 21 -
SPP-R410/L410
4. Self-Test
Run the self-test when you set the printer or when you encounter a problem, and check
the following.
- Control Circuit, Mechanisms, Print Quality, ROM Version, and Memory Switch Settings
If no issue is found with the printer after running the self-test, examine the other devices or
peripherals and software. This function is independent of such other devices and software.
• Self-Test Instructions
1) Turn the printer power off and close the printer paper cover.
2) Press and hold the paper feed button and power button simultaneously to turn on the
printer.
3) After printing begins, release the two buttons.
4) After the information is printed out, the self test is automatically terminated
• Self-Test Sample (SPP-L410)
BIXOLON SPP-L410 CONFIGURATION
FIRMWARE VERSION
: V01.00 STD 010119
EMULATION
: SLCS & BPL-Z & BPL-C
PRINT DARKNESS
: 10/30
PRINT SPEED
: 4 IPS
TEAR OFF VALUE
: +000 DOT
TEAR OPTION
: TEAR-OFF
PRINT OFFSET
: +0000 DOT
POWER-UP ACTION
: NO ACTION
MEDIA TYPE
: BLACKMARK PAPER(REAR)
SENSOR TYPE : REAR REFLECT
PRINT METHOD : DIRECT THERMAL
LABEL LENGTH
: 1013 DOT
LABEL WIDTH : 832 DOT
BAUD RATE
: 115200
PARITY
: NONE
DATA BIT(S) : 8
STOP BIT(S)
: 1
HAND SHAKING
: HARDWARE
USB SERIAL NUMBER
: 0000000000001
BPL-Z CODEPAGE : CP-850(SBE. USA-1 CHARSET)
SLCS CODEPAGE
: WCP1252-LATIN1
SLCS ICS
: U.S.A
CONFIGURATION CONTROL STATUS
PRINT SPEED
: COMMAND
PRINT DARKNESS
: COMMAND
PRINT WIDTH
: COMMAND
PRINT OFFSET
: COMMAND
TEAR OFF : COMMAND
MEDIA TYPE : COMMAND
LANGUAGE
: COMMAND
RF INTERFACE STATUS (BT)
BLUETOOTH F/W VER : 2.0.5
MAC ADDRESS
FRIENDLY NAME : SPP-L410
MODE : CLASSIC
AUTH & ENCRYPT
: ENABLED
CONNECTION MODE
: 2
