Ver. 1.04
- 12 -
SPP-R410/L410
3. Installation & Usage
3-1 Battery Installation
1) Insert the battery in the bottom of the
printer, and ensure that you align the
battery hook properly.
2) Push the battery into the slot until you hear
it snap in place.
NOTE
Since the battery is partially changed at the
time of purchase, charge the battery prior to
product use. (Use the battery)
3-2 Battery Charging
3-2-1 Using Battery Charger
1) Turn off the printer power.
2) Connect the power cord
②
to the battery
charger
①
, and then connect AC power.
3) Open the external interface cap in the
direction of
③
.
4) Connect the battery charger to the power
connector.
CAUTION
The printer may incur serious damage if the
battery charger provided by BIXOLON is not
used. BIXOLON is not legally liable for any
such damages. (The voltage and electrical
current specifications of the printer and
battery charger must match.)
WARNING
Turn off the power before charging the battery
for the printer.
①
②
③
