Rev. 1.00
- 20 -
SLP-DX420B/DX423B
5-2 Stand-alone Configuration Mode
Various modes can be executed using buttons and LED only.
5-2-1 How to start stand-alone configuration mode
• The printer mode is set to Printer Setting Mode when the Pause button is pressed
for two seconds while in Print Standby Mode.
• Both LEDs will change to orange color and the printer will be set to Stand-alone
Configuration Mode.
• When the printer enters into this mode, the status of LED 1 and LED 2
are changed sequentially.
• When the Feed button is pressed at specific LED color combination, the
corresponding printer operation will be selected.
5-2-2 List of supported functions
Sequence
number
LED 1
LED 2
Printer operation
Color
Status
Color
Status
1
Green
On
Green
Blink four times Print Configuration Info.
2
Orange Blink four times Print File List
3
Red
Blink four times Factory Reset
4
Orange
On
Green
Blink four times Gap Sensor Auto Calibration
5
Orange Blink four times B/M Sensor Auto Calibration
6
Red
Blink four times Data Dump Mode
7
Red
On
Green
Blink four times
BT SSP MODE(PinCode/SSP mode)
8
Orange Blink four times Line Mode
9
Red
Blink four times Download Items Delete
