Rev. 1.00
- 14 -
SLP-DX420B/DX423B
3-3 Paper Installation
1) Open the Paper Cover.
2) Spread the Paper Holder and insert
paper roll.
3) Pull the paper so that it extends out of the front of the printer. Push the paper under
both of the Paper Guide.
* Whether the paper label is wound inwards or outwards, its printing surface must
face up.
4) If you use Black-Mark or Notch paper roll, please lift up the paper and match the
sensor position adjust the black mark or notch hole.
5) Close the Paper Cover until a click sound is heard.
Moveable Black-Mark Sensor
and Notch Sensor
●
●
Paper Guide
Paper Cover
Paper Holder
