Page 4
1. Read this first
The contents of this manual are subject to change
without notice.
Lodam electronics holds the copyright to this user’s
manual. The user must follow any instructions given in this
user manual entirely and not only partly. Any non-follow-
ing of this user manual result in exclusion of all warranties,
guarantees, and liabilities.
Copyright© 2013 by Lodam electronics a/s. All Rights
Reserved.
Disposing of the parts of the controller:
INFORMATION FOR USERS ON THE COR-
RECT HANDLING OF WASTE ELECTRICAL
AND ELECTRONIC EQUIPMENT (WEEE)
In reference to European Union directive 2012/19/EU and
the related national legislation, please note that:
1. WEEE cannot be disposed of as municipal waste and
such waste must be collected and disposed of sepa-
rately;
2. The public or private waste collection systems defined
by local legislation must be used. In addition, the equip-
ment can be returned to the distributor at the end of its
working life when buying new equipment;
3. The equipment may contain hazardous substances:
the improper use or incorrect disposal of such may
have negative effects on human health and on the
environment;
4. The symbol (crossed-out wheeled bin) shown on the
product or on the packaging and on the instruction
sheet indicates that the equipment must be disposed
of separately;
5. In the event of illegal disposal of electrical and elec-
tronic waste, the penalties are specified by local waste
disposal legislation.
1.1. Installation
Before installation, the user should be thoroughly
familiarized with this technical manual, especially
with purposes, installation, settings and operation.
Special care should be taken when installing and con-
necting external equipment (sensor, high voltage etc.)
and handling the PCB’s correctly according to protection
against ESD.
Installation of the LMC341 DIWE Condensing Unit Control-
ler must be performed by authorized personnel only. All
warranties are excluded in case installation is performed
by unauthorized personnel or in case the LMC341 DIWE has
not been correctly installed.
Electrical plant failures are to be immediately solved, even
though no immediate danger exists; the LMC341 DIWE
must not be operating.
1.2. Safety
The LMC341 DIWE is not a safety component and
cannot be used in “medical” or “life support”
equipment.
The LMC341 DIWE is not a safety component according to
the Machinery Directive.
Before commissioning, the service technician shall ensure
that personal safety requirements are met in conformity
with the Machinery Directive based on safety estimations.
The LDH105 should not be apart when operating.
Fuses can only be replaced and NOT left out.
Operation staff must in detail be informed about operating
the LMC341 DIWE before operating the LMC341 DIWE.
Only use recommended parts/spare parts on the LMC341
DIWE. All warranties are excluded in case unoriginal part/
spare parts are installed.
