Bittium Tough Mobile 2, Быстрый старт

Страница: 8 / 24

Bittium Tough Mobile 2 Quick Start Guide
8
Security Notification
In case you see one of these texts during use:
“The always on security system has detected a hardware
protection event. As a security procedure, all data in the
phone has been erased.”
or
“The always on security system has detected power loss
on backup battery. As a security procedure, all data in the
phone has been erased.”
This can happen if
1) phone has received a heavy impact or an attempt
has been made to open the chassis; and/or
2) the phone has not been recharged for a long time.
If these notifications keep appearing try setting the
tamper detection level setting to Basic. If this does
not help contact your service or customer support.
Security wizard
The device is equipped with a Security Wizard
that is launched during the initial power up of the
device. Security Wizard is used to set up a number
of different device settings. Follow the on-screen
instructions by first setting a screen lock code.
The number of set up steps may vary depending
on the security features of the device.
Lock screen
Switching off the display locks the device.
The device also locks after a period of inactivity.
Switch the display off by pressing the power key
once.