Bittium Respiro Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 48

Bittium Respiro Скачать руководство пользователя страница 19

Respiro

19 (48)

Operating Instructions

© Bittium Biosignals 2022

2.6.3

Checking the device pairs

Note! Make sure that Respiro is not in the charger dock or connected to a com-
puter.

The carry case equipment (Respiro, pulse oximeter) is already connected together
by the manufacturer. It is possible to find out the device pairs following the in-
structions below.

Respiro and pulse oximeter:

1.

Start the Respiro devices by pressing the power button approx. 3 seconds. All
3 indicator LEDs are blue.

2.

Press the power button again approx. 8 seconds until Respiro vibrates once
and all 3 indicator LEDs are blinking blue.

3.

After Respiro has activated the recording state all 3 indicator LEDs will be
blinking blue for few seconds. Then, after the pulse oximeter is started,
Respiro d

evice’s left LED indicator will be green, if the finger is inserted in the

sensor and yellow if it is not. Respiro is not connected to the pulse oximeter
in question if the left LED indicator is red.

4.

Attach the sensor to the pulse oximeter first and then insert your finger in it.
Alternatively,

you can press the pulse oximeter’s power button with your

fingernail to start it. Finger does not need to be inserted in this case.

«
...
17
18
19
20
21
...
»

Содержание Respiro

















































Отзывы:

Нет отзывов